kpw 125 Manuale-dofficina : Pagina 43

          4. FUEL SYSTEM                                                                    K-PIPE 125



 SERVICE INFORMATION
 GENERAL INSTRUCTIONS

  · Gasoline is very dangerous. When working with gasoline, keep sparks and flames away from
    the working area.
  · Gasoline is extremely flammable and is explosive under certain conditions. Be sure to work in
    a well-ventilated area.
  · Do not bend or twist control cables. Damaged control cables will not operate smoothly.
  · When disassembling fuel system parts, note the locations of O-rings. Replace them with new
    ones during reassembly.
  · Before float chamber disassembly, loosen the drain screw to drain the residual gasoline into a
    clean container.
  · After the carburetor is removed, plug the intake manifold side with a clean shop towel to
    prevent foreign matters from entering.
  · The carburetor air jets and fuel jets must be cleaned with compressed air.
  · When the motorcycle is not used for over one month, drain the residual gasoline from the
    float chamber to avoid erratic idling and clogged slow jet due to deteriorated fuel.



 SPECIFICATIONS

              Item                        Standard
        Carburetor type                     PIF
          Venturi dia.                     17.5
          Piston dia.                      14.9
            Main jet                        85#
           Idle speed                  1700150rpm
     Throttle grip free play             26mm
      Air screw opening                     2


 SPECIAL TOOL
 Float level gauge




                                                                                             4-2