3. LUBRICATION SYSTEM K-PIPE 125 ENGINE OIL/OIL FILTER Upper Limit OIL LEVEL · Place the motorcycle upright on level ground for engine oil level check. · Run the engine for 23 minutes and check the oil level after the engine is stopped for 23 minutes. Check the oil level. If the level is near the lower limit, fill to the upper limit with the specified engine oil. OIL CHANGE The engine oil will drain more easily while the engine is warm. Remove the drain bolt to drain the engine oil thoroughly. Check the drain bolt washer for damage or Drain bolt deformation and replace with a new one if necessary. ENGINE OIL FILTER Remove the right crankcase cover attaching bolts and right crankcase cover. Remove the dowel pins and gasket. Clean oil filter screen. Bolts Remove the right crankcase cover attaching bolts and right crankcase cover. Remove the dowel pins and gasket. Clean oil filter screen. Specified Oil: SAE15W/40 API service classification: SJ Oil Capacity: At disassembly : 1.0 liter At change : 0.9 liter Check for oil leaks and then start the engine and let it idle for few minutes. Stop the engine and recheck the oil level. 3-3