15. IGNITION SYSTEM SPORT CUB 125 CDI UNIT CDI Coupler REMOVAL Remove the left side cover (page 14-3). Disconnect the CDI coupler and remove the CDI unit. CDI Unit INSPECTION Black/Yellow Black/Blue Measure the resistance between the CDI unit terminals. Replace the CDI unit if the readings are not within the specifications in the table below. · Due to the semiconductor in circuit, it is necessary to use a specified tester for accurate testing. Use of an improper tester or measurements in an improper range may give false readings. · Use a Sanwa Electric Tester or Kowa Electric Tester TH-5H for testing Blue/Yellow Green/White e · In this table, "Needle swings then returns" indicates that there is a charging current applied to a condenser. The needle will then remain at "" unless the condenser is discharged. Testing Range Use the xK range for the Sanwa Tester. Use the x100 range for the Kowa Tester. Unit: K (+)probe Black/ Black/ Black/ Blue/ Green yellow red white yellow (-)probe Black/ yellow Black/ 0.1-10 red Black/ white Blue/ 0.5-50 0.5-200 1-50 yellow Green 0.1-10 0.2-30 1-100 15-5