3. INSPECTION/ADJUSTMENT UXV 500 ENGINE OIL REPLACEMENT AND OIL FILTER CLEANING 1. Place the machine on a level place. 2. Warm up the engine for several minutes and stop it. 3. Place a container under the engine. 4. Remove the oil filler cap (1). Be sure no foreign material enters the crankcase. (1) oil fill cap (2) 5. Remove the oil filter cap (2) to drain the oil. The engine oil will drain more easily while the engine is warm. 6. Clean the oil strainer with solvent. Compression Spring O-ring Inspect the O-ring and replace if damaged. Reinstall the O-ring, oil strainer, compression spring and oil filter cap. Tighten the oil filter cap to specification. Torque: 1.5 kgf-m (15 N-m, 11 lbf-ft) 7. Fill the engine with oil and install the oil filler cap. Oil Strainer Oil Filter Cap Engine oil capacity At disassembly: 3.6 liter (3.17 lmp qt, 3.82 Us qt) At change: 3 liter (2.64 lmp qt, 3.18 Us qt) After draining and oil filter cartridge change: 3.2 liter (2.82 lmp qt, 3.39 Us qt) 3-14