3. INSPECTION/ADJUSTMENT MXU 500 IRS 7. Turn the rod clockwise or counterclockwise to align the joint ball in the rod with the hole on the shift arm, then install and tighten the bolt and nut. When align the joint ball in the rod with the hole on the shift arm. Always keep the joint ball original position, do not turn the joint ball. 8. Tighten the lock nuts of the rod. CABLE INSPECTION AND LUBRICATION Damaged cable sheath may cause corrosion and interfere with the cable movement. An unsafe condition may result so replace such cable as soon as possible. Inspect the cable sheath. Replace if damage. Check the cable operation. Lubricate or replace if unsmooth operation. Hold cable end high and apply several drops of lubricant to cable. LEVER LUBRICATION Lock Nut Lubricate the pivoting parts of each lever. ADJUSTING THE REAR BRAKE LIIGHT SWITCH (BRAKE PEDAL) 1. Loosen the lock nut. 2. Turn the adjusting nut clockwise or counterclockwise until the rear brake light comes on at the proper time. 3. Tighten the lock nut securely. Adjuster 3-29