14. FRONT WHEEL/FRONT SUSPENSION STEERING SYSTEM MXU 500 IRS · Be sure the handlebar holder mark face to front. · First tighten the bolts on the front side of the handlebar holder, and then tighten the bolts on the rear side. Install the handlebar switch by aligning the pin on the handlebar switch with the hole in the handlebar and then tighten the two screws securely. Place the right and left brake master cylinder on the handlebar and install the master cylinder holder with the "UP" mark facing up, aligning the punch mark on the handlebar with the holder joint seam. First tighten the upper bolt and then tighten the lower blot. Torque: 1.2 kgf-m (12 N-m, 8.6 lbf-ft) 14-17