dinkstreet 300 i abs 1 Manuale-dofficina : Pagina 61

          5. ENGINE REMOVAL/INSTALLATION                                                   Downtown 300i ABS



 SERVICE INFORMATION

 GENERAL INSTRUCTIONS
 · A floor jack or other adjustable support is required to support and maneuver the engine. Be
   careful not to damage the scooter body, cables and wires during engine removal.
 · Use shop towels to protect the scooter body during engine removal.
 · Drain the coolant before removing the engine.
 · After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the
   water jacket. Start the engine to check for coolant leaks.
 · Before removing the engine, the rear brake caliper must be removed first. Be careful not to bend
   or twist the brake fluid tube.


 SPECIFICATIONS

 Engine oil capacity:
   At disassembly: 1.5 L
   At change: 1.3 L

 Coolant capacity:
  Radiator:                                        766 cc
  Hose with cool coolant:                          169 cc
  Hose with hot coolant:                           194 cc
  Reserve tank:                                    590 cc
  Total capacity:                                 1719 cc



 TORQUE VALUES

 90304-GHE8-0040            Engine hanger (Engine side)              5.0 kgf-m (50 N-m)
 90305-LBD4-9000            Engine hanger (Frame side)               6.5 kgf-m (65 N-m)
 95801-10060                Rear fork mount bolts                    3.5 kgf-m (35 N-m)
 90305-KFW6-9120-M1         Rear axle nut                            12.0 kgf-m (120 N-m)
 95801-10035-00             Rear cushion lower/upper mount bolts     4.0 kgf-m (40 N-m)




5-1