5. FUEL SYSTEM AGILITY CITY 125 CARBURETOR REMOVAL Auto Bystarter Remove the frame right side cover. ( 2-4) Disconnect the auto bystarter wire connector. Remove the met-in box. ( 2-3) Auto Bystarter Wire Loosen the drain screw and drain the fuel from the float chamber. Disconnect the fuel tube and vacuum tube at the carburetor. Disconnect the TPS coupler and remove the TPS unit TPS Unit Fuel Tube Loosen the throttle cable adjusting nut and lock nut, and disconnect the throttle cable from the carburetor. Air Cleaner Connecting Vacuum Tube Intake Manifold Tube Band Band Loosen the carburetor intake manifold band and air cleaner connecting tube band screws and then remove the carburetor. AUTO BYSTARTER Throttle Cable Adjusting Nut Lock Nut OPERATION INSPECTION Measure the resistance between the auto bystarter wire terminals. Resistance: 10 max. (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto bystarter with a new one. 5-4