4. LUBRICATION SYSTEM AGILITY CITY 50 2T Oil Pump Control Cable OIL PUMP REMOVAL Do not allow foreign matters to enter the crankcase. Before removing the oil pump, clean the oil pump and crankcase surfaces. Remove the met-in box. ( 12-4) Oil Outlet Line Oil Inlet Line Control Cable Plate Disconnect the oil pump control cable from the pump body. Disconnect the oil inlet line from the oil pump. Then, disconnect the oil outlet line. Before disconnecting the oil line, clip the oil line to avoid oil flowing out and then plug the oil line after it is disconnected. Remove the oil pump control cable plate bolt. Remove the oil pump from the crankcase. Bolt O-ring OIL PUMP INSPECTION Remove the oil pump and inspect the following items: · Weakened O-ring · Damage to crankcase mating surface · Damage to pump body · Control lever operation · Oil leaks through oil seals · Worn or damaged pump pinion Do not disassemble the oil pump which cannot be used after disassembly. Control Lever Pinion 4-3