3. INSPECTION/ADJUSTMENT MXU 500 IRS
13. Start the engine and warm it up for
several minutes. While warming up,
check for oil leakage. If oil leakage is
found, turn the engine off immediately
and check for the cause.
14. Turn the engine off, and then check the
oil level through the inspection window
(7) and correct it if necessary.
(7)
REAR GEAR BOX OIL
Change the oil in the rear gear case when
specified by the Maintenance Schedule.
Change the oil with the rear gear case warm,
and the ATV on level ground to assure
complete and rapid draining.
Rear drive gear oil replacement
2. To drain the oil, first place an oil drain
pan under the oil drain plug (4).
3. Remove the oil filler cap (5), then remove
the drain plug.
4. After the oil has completely drained,
reinstall the drain plug.
Torque: 2 kgf-m (20 N-m) (4)
5. Fill the gear case with the recommended
oil. (5)
Recommended oil: SAE 80
Oil quantity:
Periodic oil change:
0.23 L
3-17
4.7 / 5