3. INSPECTION/ADJUSTMENT MXU 500 IRS
Compression Gauge
CYLINDER COMPRESSION
Warm up the engine before compression
test.
Remove the spark plug.
Insert a compression gauge.
Open the throttle valve fully and push the
starter button to test the compression.
Cylinder compression:
15 kg/cm
If the compression is low, check for the
following:
- Leaky valves
- Valve clearance too small
- Leaking cylinder head gasket
- Worn piston rings
- Worn piston/cylinder
If the compression is high, it indicates that
carbon deposits have accumulated on the
combustion chamber and the piston head.
Upper Level
ENGINE OIL
OIL LEVEL
Place the machine on a level place.
Warm up the engine for several minutes and
stop it.
Run the engine for 23 minutes and
check the oil level after the engine is
stopped for 23 minutes.
Lower Level Inspection Window
Check the oil level through the inspection
window.
The oil level should be between the
maximum (H) and minimum (L) marks. If
the level is low, add oil to raise it to the
proper level.
Recommended engine oil:
KYMCO 4-stroke oil or equivalent motor
oil API service classification: SJ
Viscosity: SAE 5W30
Other viscosities shown in the chart may
be used when the average temperature in
your riding area is within the indicated
range.
3-13
4.7 / 5