13-2 CARBURETOR
GRAND DINK125/150DINK125B&W125
INSPECTION
Carburetor body/jets cleaning
Check carburetor body and each jet for wear or damage.
Clean all jets with a spray-type carburetor cleaner and
dry them using compressed air.
Clean all circuits of the carburetor thoroughly-not just
the perceived problem area.
Clean the circuits in the carburetor body with a spray-
type cleaner and allow each circuit to soak, if necessary,
to loosen dirt and varnish. Blow the body dry using
compressed air.
Some carburetor cleaning chemicals ,
especially dip type soaking solutions, are
very corrosive and must be handled
carefully. Always follow the chemical
manufacturers instructions on proper use,
handling and storage.
Do not use a wire to clean the jets or
passageways. A wire can damage the jets
and passageways. If the components cannot
be cleaned with a spray cleaner it may be
necessary to use a dip-type cleaning
solution and allow them to soak. Always
follow the chemical manufacturers
instructions for proper use and cleaning of
the carburetor components
After cleaning, reassemble the carburetor with new seals.
13-2-10
4.7 / 5